KDF Neo Super Cascom Vacuum Pressure Casting unit (Neo-Super-Cascom) by www.3nitysupply.com

KDF Super Neo Cascom

Clean, easy to use, reliable casting machine, updated with the Newest Technology!

The Neo Super Cascom uses a lab environment-friendly, long life, newly developed Ceramic heater which will not overheat the alloy.

The Neo Super Cascom is a high powered casting machine with a maximum melting temperature of 1500°C and maximum alloy melting quantity of 150 gm.

The Neo Super Cascom is a state-of-the-art, high quality, casting machine which uses a highly precise and accurate Vacuum Pressure Casting system with multidirectional pressure application.

The Neo Super Cascom can cast a broad spectrum of alloys from Silver to Chrome Cobalt in a variety of inlays, crowns, implant frameworks, and metal plates with extremely accurate casting results.

With our long distinguished experience and advanced technology, we have made a safe, clean, easy-to-use, yet highly precise casting machine.

Excellent Casting Results

The innovative furnace muffle with heating element melts alloy without overheating, porosity or gas absorption in the alloy associated with gas torches. The inverting muffle chamber isolates the alloy oxide layer keeping it from mixing with melted alloy. The Neo Super Cascom incorporates vacuum and 0.44Mpa (64psi) Pressure to accurately cast the most complicated and delicate casting.

Extreme Long Life and High-Efficiency Ceramic Heater

The newly developed ceramic heater at high temperatures (over 1400°C) has a 3 X longer life than our previous ceramic heaters. Melting efficiency has been increased to allow more castings at once. Maximum Capacity: Gold, 150 gm (5 troy ounce) – CoCr, 45 gm (1.5 troy ounces).

Cast a Variety Alloys

The furnace is capable of casting numerous alloy types including silver, gold, precious and semi-precious, nickel-chrome, and chrome-cobalt to fabricate inlays, crowns, implant, and partial frameworks.

Argon Atmosphere Melting/Pressure

This feature flows argon gas within the crucible and prevents oxidation of alloys. Casting pressure can be air or Ar-gas and is easily changed with a press of a button. Using the Ar-gas pressure to cast creates oxidation free casts that minimize finishing time.

Melting Time Elapsed Pocket Buzzer

Even from a remote location, the pocket-sized, pocket buzzer will beep 5 minutes before the end of the melt cycle (at one minute intervals) allowing the technician to concentrate on other work.

Ceramic Crucible Counter

To prevent damage due to cracked or broken crucibles, the unit has a crucible counter which tracks the usage of up to 32 ceramic crucibles. The counter keeps track of Hi/Lo temperature melting to calculate the maximum cast count, further diminishing crucible replacement costs, while keeping the machine in good order.

Easy Control of Various Functions

Can be programmed with 100 different casting programs.

Can choose the melting atmosphere / pressure for individual alloys: air / Ar-gas.

Can program the casting program automatically by inputting four alloy parameters.

Can increase melting temperature without accessing the program during melting.

Can shake the crucible to easily check the melt status with the press of a button.

Can lengthen the life of the carbon crucible by minimizing the melting time.

Can check the ceramic crucible count with the press of a button.

Compact Size and Easy Set up

Compact Desktop Size enables use in the smallest In-house Dental Laboratory. The voltage and amp. is AC 220V at 15A and uses a regular household plug.

Requirements

AC 220V. 50/60Hz. Max 2.5kVA

Requires 100psi – 145psi of Pressureized Air

Argon Gas Tank with a Regulator (if you cast a metal that contains Pd more than 30%) Individual purchase required Dental Technologically, For Melting Non-Precious Alloy (Co-Cr, Ni-Cr) needs Argon Gas flow are known.

Vacuum Pump  Sold separately

Specifications

Power Requirement:

AC 220V. 50/60Hz. Max 2.5kVA

Vac Pump Outlet:

Single Phase 220V（DDP40, 2223GCE）Sold separately

Pressurized Air:

0.75MPa – 1.0MPa (110psi – 146psi)

Dimension:

20 (w) x 21 (h) x 20 (d) inches

Weight:

109lbs (49kg)

Melting:

Ceramic Heating

Casting:

Vacuum and Pressure

Max Temperature:

1,530°C (2,786°F)

Max Melting Capacity:

Precious Alloy 150g

Non-Precious Alloy 45g

Casting Ring Size:

Max. Ø90mm

Min. Ø43mm

Standard Accessories

Crucible: Carbon 3pcs, Ceramic 3pcs

Casting Rings: ø43mm(1pc), ø60mm(1pc), ø76mm(1pc), ø90mm (1pc)

(1 1/2" (1pc), 2 1/2" (1pc), 3" (1pc), 3 1/2" (1pc) dia)

Sprue Former: ø43mm(1pc), ø60mm(1pc), ø76mm(1pc), ø90mm (1pc)

(1 1/2" (1pc), 2 1/2" (1pc), 3" (1pc), 3 1/2" (1pc) dia)

Manual: Instruction Manual 1 booklet, Casting Manual 1 booklet

Crucible Stand: 1pc

Hose: 10m (ø10mm x ø6.5mm) for Argon gas and Pressurized air

(33ft (1/2" x 1/4" dia) for Argon gas and Pressurized air)

Instructions

How to make a program – PDF

How to cast precious/semi-precious metal (PALLADIUM LESS THAN 30%) – PDF

How to cast semi/non-precious metal (PALLADIUM MORE THAN 30%) – PDF

Neo Super Cascom instruction manual – PDF

Neo Super Cascom casting manual – PDF

Spruing 4 – PDF

One Year Warranty